lldp enable

Enables LLDP on the interface.

Syntax

lldp enable

no lldp enable

Parameters

enable: Enables LLDP on the interface.

Modes

Interface config mode

Usage Guidelines

The no lldp enable command disables LLDP on the interface.

Examples

The following example enables LLDP protocol.

device# configure terminal 
device(config)# interface ethernet 1/1 
device(config-if)# lldp enable 
device(config-if)# no lldp enable 

device# show running-configuration 
interface ethernet 1/1 
no lldp enable
end